Saw Sets

Saw Sets 2015-10-25T23:29:29+00:00
  • Creator
    Topic
  • #2027602

    ScottM
    Participant
    Post count: 3

    Any one have saw set preferences? I guess I’m search for a saw set that would handle most hand saws except very fine tenon saws.

    I’ve never purchased one, I’m wondering if people have had good and/or bad experiences with particular brands/models

     

    Cheers!

     

  • Author
    Replies
  • Mike in TN
    Participant
    Post count: 264

    Hi Scott,

    I have several older models of different brands that are all generally good but most of my sharpening is on finer bench saws where the size of the set hammer can be a problem. There are a lot of them out there in the $10- $15 range and you can’t go wrong with a Stanley 42x as long as it isn’t just falling apart..  They aren’t terribly complicated tools and they normally have numbers on the adjustable anvils (for those that have them) that will tell you the TPI the set was designed for. Those that don’t have adjustable anvils can be assumed to be for general carpentry saws. Paul Sellers has a video out on modifying saw sets for fine teeth. I finally broke down and bought a set ( a Somax No.250) designed specifically for finer teeth. Sorry I can’t remember where I ordered it from but it has worked very well for me. I normally sharpen all of my bench saws for rip cuts with a slightly relaxed rake, lightly set them and stone the sides of the teeth to give a straight cut with little set to help control the cut. A sharp fine rip back saw can give surprisingly good results on crosscuts also. I have learned that crosscut work with larger (fewer)  TPI does demand sharpening in a crosscut tooth configuration and that requires setting every tooth. Also, work in wet wood demands more set because of the spring in the wood fibers.

    One of the surprising things I have found is that with fine rip saw teeth in dry wood typically found at the bench, you don’t have to set every tooth. just enough to help the saw avoid binding, balanced on each side of the plate with more total teeth set for thinner stock just like you need more TPI in thinner stock. Some new saw blades are now manufactured with periodic set instead of set in every tooth.

    Have fun.

  • ScottM
    Participant
    Post count: 3

    Cheers Mike

    Looks like I’ve got options, which is good.

    Thanks for the info re setting – very useful

    And, yes, I’ll definitly be having fun restoring some old (but good) saws picked up on the weekend.

     

  • Bruce G.
    Participant
    Post count: 9

    Morning Scott,

    Mike refers to the Somax saw sets.  I believe they are available from Lee Valley in course and fine versions for around $24.50 before shipping.

    You can also find them on Ebay occasionally.

    Thanks,

    Bruce

You must be logged in to reply to this topic.

Log In
Join

Wood and Shop in your inbox?

Subscribe to get Joshua's free traditional woodworking videos, articles & news:

You have Successfully Subscribed!